MEET HANG IT HELPER · U.S. PATENT D1,132,718 S
Installation support for ceiling lights and fans
More freedom to focus.
An adjustable fixture-support tool designed to help electricians, contractors, and DIY users install light fixtures and ceiling fans.
Now accepting inquiries. No payment or purchase commitment.
Retail price: $599 + tax and shipping
🇺🇸 Proudly made in the USA
DESIGNED WITH PROFESSIONALS IN MIND
Designed to help support a light fixture or ceiling fan while you work, reducing the need to hold it manually and helping you focus on the installation. Safe setup, confirmed compatibility, and proper ladder and electrical practices remain essential.
Adjustable, rubber-coated forks are intended to provide a cushioned contact surface and help reduce the risk of fixture damage during positioning and installation. Correct placement and compatibility are essential; damage-free installation is not guaranteed.
For suitable installations, temporary fixture support may reduce the need for an additional electrician solely to help hold the fixture, creating an opportunity to save labor time and cost. Some installations still require multiple people; staffing must follow the job’s requirements and safe-use instructions.
These are intended benefits of the design. Safety improvements, damage reduction, and labor savings have not been independently verified and will vary by installation. Hang It Helper does not replace required assistance or qualified electrical work.
A LITTLE SUPPORT. A DIFFERENT PERSPECTIVE.
Holding a light fixture or ceiling fan while working on an installation can compete for your attention. Hang It Helper is being developed to provide temporary support for both at the working height.
A telescopic aluminum pole adjusts to position the support assembly where it is needed.
Adjustable, rubber-coated forks are designed to accommodate fixture widths from 2¼ to 8 inches.
Intended to help support light fixtures and ceiling fans during installation, subject to confirmed compatibility and safe-use instructions.
GET TO KNOW EVERY ANGLE
Rotate, tilt, and zoom to explore the design, from the support forks to the aluminum pole.
Open the interactive viewer in a full window ↗SEE THE PROTOTYPE IN ACTION
Watch a demonstration of Hang It Helper for additional context on the product and how it can be used.
6-minute, 31-second prototype demonstration with audio. This is a development demonstration, not a substitute for final safe-use instructions or verified load and compatibility ratings.
Download the demonstration video ↗THE REAL THING, IN DEVELOPMENT
Original prototype photographs.
No renderings. No simulated product.
Prototype demonstrations are not verified load or safety tests. Final design and appearance may change.
OPTIONAL TOOL TRAY · SOLD SEPARATELY
A lightweight, durable tray that mounts to the telescopic pole. $25.99 + tax and shipping.
Open the tray viewer in a full window ↗Ask about the tray ↗Accepting inquiries. Ordering is not open yet.
DESIGN AT A GLANCE
Hang It Helper’s design is protected by U.S. Design Patent No. D1,132,718 S.
Current design targets. Final specifications, compatibility, load ratings, and instructions must be confirmed before production and use.
Intended fixture-support target.
Not a verified load rating.
Maximum adjustable fork width
2¼ in. minimum · 8 in. rubber-coated forks.
Intended ceiling height
with a 6-foot ladder.
*Additional lengths and customizable solutions are available to purchase separately by special order. Prices may vary for custom solutions. Contact us to discuss your requirements, compatibility, pricing, and availability.
Outside diameter (OD) measures the width across the outside of each pipe.
| Section | Length | Outside diameter |
|---|---|---|
| First pole section | 32 in. | 1½ in. |
| Second telescopic section | 28 in. | 1⅜ in. |
| Third section | 23 in. | 1¼ in. |
Dimensions supplied by The Hang It Helper for the demonstrated configuration. Pole section lengths are individual measurements, not the assembled reach. Ladder compatibility and safe-use requirements must be confirmed. Tray weight capacity has not been specified.
Hang It Helper combines an aluminum pole with steel forks and a steel bracket for added strength.
OPTIONAL ACCESSORY · SOLD SEPARATELY
A lightweight, durable tray mounts to the telescopic pole, keeping electrical tape, wire nuts, drills, and screwdrivers close to your fingertips. Sold separately for $25.99 + tax and shipping. Explore the tray ↗
Need a different ceiling height? Custom ceiling-height configurations are available by special order. Prices may vary for custom solutions. Discuss your project ↗ Compatibility and specifications must be confirmed for each special order.
The photos show a development prototype, not a certified final product or an installation tutorial. Design targets are not guarantees of safe capacity or suitability. Confirm fixture compatibility, final ratings, ladder compatibility, and manufacturer instructions before use. The tool does not replace proper fixture mounting or safe ladder and electrical practices. Use qualified installation help where needed.
BE PART OF WHAT’S NEXT
Follow the journey from working prototype to launch. Get product updates and news when ordering becomes available.
Free early access. No payment details.
Now accepting product and custom-configuration inquiries. Prices may vary for custom solutions. Retail price: $599 + tax and shipping. Ordering availability will be announced.
RETAILERS, DISTRIBUTORS & SPECIAL ORDERS
Electrical suppliers, hardware retailers, and distribution partners: explore a potential fit for your customers.
Request a prototype demonstration, share your interest in future retail opportunities, or ask about a custom ceiling-height configuration for your project. Prices may vary for custom solutions.
A FEW MORE DETAILS
Yes. Hang It Helper is designed to help temporarily support both light fixtures and ceiling fans during installation. Suitability depends on the specific fixture or fan, confirmed compatibility, final load ratings, and safe-use instructions.
Custom ceiling-height configurations are available by special order. Prices may vary for custom solutions. Share your project’s ceiling height and requirements through the inquiry form so the configuration, compatibility, pricing, and availability can be discussed. The 10-foot ceiling / 6-foot ladder combination shown above is the current standard design target; it does not establish specifications for custom configurations.
Yes. The optional lightweight, durable tray mounts to the telescopic pole to keep electrical tape, wire nuts, drills, and screwdrivers close to your fingertips. Sold separately for $25.99 + tax and shipping. Ordering is not open yet; include your interest in the tray with your free early-access request.
Ordering is not open yet. The current launch strategy is free early access, with no payments or purchase commitments. Retail price is $599 + tax and shipping. Production timing and availability have not been announced.
Yes. These are the original working prototype photographs. The production model may change. Images do not establish verified load ratings, safety certification, or compatibility.
No. Early access is for product updates and launch news. It does not reserve inventory, create a price guarantee or an order.
Requests are submitted through FormSubmit and emailed to Hang It Helper. Each request includes a reference number and submission time. FormSubmit keeps a backup archive for 30 days; the email copy can be retained longer. You may be asked to complete a spam-prevention check. The Hang It Helper uses your details to respond and share purchase information when available. Submitting a request does not place an order.